ad

鉱山廃棄物による炭素貯留の可能性を示す研究(Mining waste product could help store carbon emissions, study suggests)

ad

2026-04-17 コンコルディア大学

カナダのConcordia University主導の研究は、鉱山廃棄物が二酸化炭素の貯留に活用できる可能性を示した。研究では、採掘後に残る尾鉱に含まれる鉱物がCO₂と反応し、安定した炭酸塩として固定化する「鉱物炭酸化」に着目。このプロセスにより、大気中のCO₂を長期的に封じ込めることが可能とされる。特にニッケルやダイヤモンド鉱山の廃棄物は反応性が高く、有望な貯留資源と考えられる。従来は環境負荷の懸念があった廃棄物を逆に炭素削減に活用できる点が特徴であり、産業副産物を利用した低コストな気候変動対策として期待される。本研究は炭素回収・貯留(CCS)の新たな手法として、持続可能な資源利用と排出削減の両立に貢献する可能性を示した。

<関連情報>

鉄分を多く含むスラグ材料による炭素隔離の評価 Evaluation of carbon sequestration by iron-rich slag materials

Samantha M. Wilcox, Catherine N. Mulligan, Carmen Mihaela Neculita

Chemical Engineering Journal  Available online: 4 March 2026

DOI:https://doi.org/10.1016/j.cej.2026.174903

Graphical abstract

鉱山廃棄物による炭素貯留の可能性を示す研究(Mining waste product could help store carbon emissions, study suggests)

Highlights

  • CO2 capture by titanium slag achieved up to 99.5% CO2 removal
  • CO2 trapping achieved was up to 98.5% in the solid phase primarily via adsorption
  • Mineral trapping was as CaCO3 and Fe6(OH)12CO3H2O
  • Liquid phase CO2 removal was via solubility and mineral trapping

Abstract

Mining and metalliferous alkaline waste offer an opportunity for carbon sequestration by trapping carbon dioxide (CO2) through hydration, sorption, or precipitation. The objective of this paper was to determine the feasibility of two iron-rich slag materials for use as a substrate to sequester injected CO2. The physical, chemical and mineralogical characteristics of both samples were analyzed showing a larger particle size, smaller surface roughness, and higher porosity for S2 than S1. Both samples were injected with 10% v/v CO2 in airtight media bottles that were agitated for 24 h with various initial moisture conditions. Both wastes exhibited high potential for carbon trapping with up to 92.5% and 99.5% CO2 removal for samples S1 and S2, respectively. Through qualitative and quantitative analysis, results showed that both samples showed precipitates of minor carbonate phases. S1 precipitated calcium carbonate (CaCO3) and S2 precipitated CaCO3, magnesite (MgCO3), and siderite (FeCO3) achieving mineral trapping. However, the majority of solid phase CO2 removal was attributed to chemical adsorption onto the metal-based surfaces of iron-rich slag materials. At 10% (v/v) CO2, solid phase CO2 trapping has the potential to remove 1000 and 1073 g CO2 per tonne of S1 and S2, respectively. The results are promising for carbon trapping using metalliferous waste at low moisture conditions.

タイトルとURLをコピーしました