ad

インフラ点検の安全性と信頼性を高める自動評価技術(Making infrastructure inspections safer and more reliable)

ad

2026-11-16 スイス連邦工科大学ローザンヌ校(EPFL)

スイス連邦工科大学ローザンヌ校(EPFL)の研究チームは、送電鉄塔、鋼橋、通信設備、スキーリフトなどの重要な鋼構造インフラの点検を安全かつ高精度に行うため、3次元レーザースキャン、物理シミュレーション、人工知能(AI)を組み合わせた自動点検手法を開発した。まず、構造部材をレーザースキャナーで計測し、形状や変形を点群データとして取得する。次に、数千件の実験データと物理シミュレーションで検証した仮想試験データを用いて学習したアルゴリズムにより、部材の変形や損傷を解析する。さらに、損傷した部材が安全に支持できる荷重を推定し、継続使用の可否や補修の必要性を評価する。本手法の重要な特徴は、スキャン解像度や周辺環境によって生じる測定ノイズを定量化し、その不確実性が最終的な評価結果に与える影響まで考慮できる点にある。人による点検を代替するのではなく、専門家の判断を支援する仕組みであり、危険な場所での作業削減、点検の効率化、維持管理費の低減が期待される。今後はドローンとの連携や、供用終了後の鋼構造部材の安全な再利用に向けた予測技術への展開も検討されている。

<関連情報>

自動点検を支援するための、大変形および計測ノイズを考慮した鋼部材の自動幾何形状復元手法
Proposed methodology for automated geometric reconstruction of steel members considering large deformations and measurement noise to facilitate automated inspections

Tianyu Gu, Dimitrios G. Lignos, Nenad Bijelić
ScienceDirect Elsevier Computers & Structures 330:108332 2026-06-23(Version of Record)
DOI: 10.1016/j.compstruc.2026.108332

Tii-summary

鋼構造物は、地震や強風などの外力によって局部座屈などの非線形な幾何学的変形を生じることがあり、構造安全性の評価や災害後の点検には、変形状態を正確に把握する技術が必要となる。本研究では、3次元点群データからH形鋼などのI形鋼部材の断面形状と3次元幾何形状を自動的に再構築する手法を開発した。複数の断面位置でウェブやフランジの特徴を認識し、断面寸法と中心線を抽出・統合することで、局部座屈などによる大きな変形を含む部材形状を再現する。また、異なる環境条件や計測機器によるスキャンノイズを定量化し、計測品質と取得時間のバランスを評価した。物理シミュレーションに基づく点群データに現実的なノイズを付加した検証に加え、3Dプリント製および実鋼製部材の実測データを用いて手法を検証した。その結果、断面形状の認識成功率はほぼ100%に達し、既存手法と比較して平均誤差約2 mmの高精度な再構築と、頑健性および計算効率の向上を実現した。本技術は、橋梁や送電鉄塔などの鋼構造インフラの自動点検、災害後の損傷評価、維持管理の高度化に貢献することが期待される。

Steel structures can experience nonlinear geometric deformations, such as local buckling, under external loads, making accurate geometric assessment essential for structural safety evaluation and post-event inspections. This study develops an automated methodology for reconstructing the cross-sectional profiles and three-dimensional geometry of I-shaped steel members from 3D point clouds. The method identifies web and flange features at multiple cross-sectional locations, extracts sectional dimensions and centerlines, and integrates these data to reconstruct the overall geometry, including substantial deformations caused by local buckling. The researchers also quantify scanning noise under different environmental conditions and with different scanning devices to evaluate the balance between scanning quality and acquisition time. The methodology is validated using physics-based simulated point clouds augmented with realistic measurement noise, as well as actual scans of 3D-printed and steel members. The results demonstrate a nearly 100% cross-section recognition success rate and improved accuracy, robustness, and computational efficiency compared with existing methods, achieving a mean reconstruction error of approximately 2 mm. This technology is expected to contribute to automated inspections, post-disaster damage assessment, and improved maintenance of steel infrastructure, including bridges and electrical transmission towers.

0902鋼構造及びコンクリート
ad
ad
Follow
ad
ad
タイトルとURLをコピーしました